Back to Blog
How-to Guides 2026-11-21 La Catrina Nails. TX 1 views

La Catrina Alcohol Inks 2: Color Mixing Guide

La Catrina Alcohol Inks 2: Color Mixing Guide

Learn how to mix La Catrina Alcohol Inks 2 for stunning marbled nail art. Step-by-step application tips, drying times, and safety advice from the catalog.

Getting Started with Alcohol Ink Color Mixing

La Catrina Alcohol Inks 2 Collection gives you six vibrant shades—Toothless, Smaug, Kaluth, Hydra, Spyro, and Sunfire—for creating custom marbled nail art. Because these inks are highly concentrated, a little goes a long way when you mix them. The key to successful color mixing is using the right base and tools, which the product directions clearly outline.

Before you begin, shake the bottle well. The inks settle over time, so a good shake ensures even pigment distribution. Always work in a well-ventilated area and keep the inks away from direct sunlight and open flames.

How to Mix and Apply La Catrina Alcohol Inks for Marbled Nail Art

  1. Prepare the nail surface: Apply a layer of Velo De Terciopelo Matte Top Coat as your base. The alcohol ink works best on this specific top coat; results may vary with other brands.
  2. Mix your colors on the nail: Using pure 100% acetone and a #2 Kolinsky Acrylic Brush, dip the brush into the acetone, then touch it to a drop of alcohol ink on the nail. The acetone helps spread and disperse the ink, creating a marble effect. You can blend two or more shades directly on the nail by overlapping drops before they dry.
  3. Let the design dry: Allow the ink to air dry for at least 45 seconds. This short wait is critical—if you seal it too soon, the marble pattern may smear or lose definition.
  4. Seal the design: Top with Brillo Imortal Top Coat. Again, results may differ if you use a different top coat. Make sure the cap is on tightly after each use to avoid spills or evaporation.

Key Product Facts for Mixing

  • La Catrina Alcohol Inks 2 Collection: Each bottle contains 15 ml of alcohol ink. The small volume means you can experiment with many color combinations without using much product. Store the bottles in a cool, dry place to prevent evaporation.
    La Catrina Alcohol Inks 2 Collection
    La Catrina Alcohol Inks 2 Collection
  • La Catrina Alcohol Inks 2 Collection: Use pure 100% acetone and a #2 Kolinsky Acrylic Brush to spread the ink. The acetone acts as a thinner and dispersant, letting you control how far the ink spreads. The fine brush gives you precision for detailed marble veins.
  • La Catrina Alcohol Inks 2 Collection: Let the ink air dry for at least 45 seconds before applying top coat. This drying time sets the pattern. Rushing this step can ruin the marble effect.

Color Mixing Tips for Marbled Effects

To create a gradient marble, start with a light shade like Sunfire (yellow) and add a tiny drop of a darker shade like Hydra (blue) or Spyro (green) near the edge. Use the acetone-dampened brush to pull the darker color into the lighter one, creating soft transitions. For a more dramatic contrast, try pairing Smaug (warm tone) with Kaluth (cool tone).

Because the inks dry quickly (45 seconds), work on one nail at a time. If you want to blend multiple nails, prepare all the base coats first, then apply the inks in sequence. Avoid skin contact with the ink—it can stain. If irritation occurs, discontinue use.

What the Catalog Does Not Confirm

The product listing does not specify exact mixing ratios or how to create specific named color blends. The six shades are supplied as individual colors, and the mixing advice here is based on general alcohol ink techniques combined with the supported application steps. For best results, experiment with small drops on a practice surface before applying to your nails.

Related Articles

Customer Service
Home
Products
Cart
Profile