How to Use a Nail Stand for Epoxy Decorations

By La Catrina Nails. TX | Published: 2026-10-26

Category: How-to Guides

Learn how to use a single nail stand for epoxy decorations. This guide covers setup, application, and curing tips for flawless results.

Quick answer

Use a single nail stand to hold your epoxy decorations steady while you apply and cure the resin. The stand keeps your work at eye level and prevents smudges.

Why use a nail stand for epoxy decorations?

A nail stand lifts your piece off the work surface, giving you 360-degree access and reducing the chance of dust or fingerprints settling on the wet epoxy. It also allows you to rotate the decoration easily while you work, which is especially helpful for detailed designs or layered pours.

Choosing the right size

The Loteria La Catrina single nail stand comes in 2.5-inch and 3-inch sizes. The smaller size works well for individual press-on nails or small charms, while the larger size offers more stability for bulkier epoxy pieces like keychains or coasters. Pick the size that matches your typical project scale.

Step-by-step: Using a nail stand for epoxy decorations

Prepare your workspace: Cover your table with a silicone mat or wax paper. Place the nail stand on a level, stable surface. Have your epoxy resin, mixing tools, and decoration ready. A clean, dust-free area is essential—any particles will stick to the wet epoxy.
Position your decoration on the stand: Set your decoration (e.g., a press-on nail, charm, or keychain) onto the epoxy side of the nail stand. Press gently so it adheres without sliding. If your piece has a flat back, center it for balance. If the piece wobbles, the epoxy side may need a quick wipe with isopropyl alcohol to remove dust.
Mix and apply the epoxy: Follow your epoxy resin's instructions for mixing ratio and working time. Use a toothpick or small brush to apply a thin, even layer over the decoration. Rotate the stand as needed to reach all sides. Avoid over-applying—excess epoxy can drip and create uneven edges or a sticky mess.
Cure the epoxy: Place the stand with the decoration in a dust-free area. Allow the epoxy to cure for the full time recommended by the manufacturer (usually 24–72 hours). Do not move the stand during curing. Moving the stand while the epoxy is still tacky can cause the decoration to shift or the epoxy to run.
Remove the finished piece: Once fully cured, gently twist or lift the decoration off the stand. If it sticks, use a plastic scraper or a drop of rubbing alcohol to loosen the bond. Never use a metal tool—it can scratch the epoxy finish or the stand's surface.

Product used in this guide

Loteria La Catrina ~ 1 Single Nail Stand ~ Epoxy on 1 side: This single nail stand features Loteria La Catrina artwork with epoxy on one side and is available in 2.5-inch or 3-inch sizes. The epoxy side gives you a non-slip surface to rest your decoration on, and the two size options let you match the stand to the scale of your project.
Loteria La Catrina ~ 1 Single Nail Stand ~ Epoxy on 1 side